News
January 12th, 2012
whats needed for a machine vision camera to conduct license plate recognition?
It's not every day that something moves out of a niche and enters
the mainstream traffic market,
yet that’s exactly what machine
vision cameras have done. And
the best thing, writes Louise
Smyth in her Machine Vision Analysis, is that this might only be
the start of things to come.
In this article Adimec assesses whats needed for a
machine vision camera to conduct license plate recognition.
Read more ...
January 11th, 2012
Aging Population Boosts Medical Microscopy Vision Markets
“We’re seeing new opportunities for using high-speed CMOS sensors in microscopy, digital pathology, and fluorescence applications,” explains Prof. Dr. Joost van Kuijk, Vice President Marketing and Technology for Adimec (Eindhoven, The Netherlands).
Read more ...
November 30th, 2011
Innovation awards recognise major advances in 3D TV and electric vehicle projects.
The winner of the CATRENE award was TritonZ, a smaller project on 3D TV which has produced substantial results including a new world standard for high
speed digital interfacing.
Read more ...
November 22nd, 2011
Adimec announces MEDEA+ project TritonZ proud winner of the 2011 Innovation Award
Eindhoven, The Netherlands, 15 November 2011, Adimec (www.adimec.com), a world leader in application-specific, leading-edge industrial camera solutions, announces that the MEDEA+ project TritonZ, has been awarded with the 2011 Innovation Award which was granted during the European Nanoelectronics Forum on 15 November, 2011 in Dublin.
Read more ...
November 7th, 2011
CoaXPress standard gets camera, frame grabber support
With the benefits of 100-m camera-to-computer connectivity coupled with 6-Gbit/s/channel speeds, the CoaXPress interface is positioned to allow system developers the flexibility of Gigabit Ethernet cable distances while attaining speeds close to that of Camera Link (Full).
Recently, support for the CoaXPress standard has gained momentum with three camera companies and four frame grabber vendors now offering products
Read more ...
November 1st, 2011
Adimec offers custom coating options and cover glass removal service to enhance accuracy of off the shelf image sensors
“We realize that just about every camera application has some specific requirements that cannot be addressed with a universal solution. In fact, the majority of the cameras we provide are customized to some extent, whether it’s the form factor, the interfaces, or the image sensor,” said Joost van Kuijk VP Marketing & Technology at Adimec. “There is strong demand in high-end systems for approaches that enhance the accuracy of the images, and these two services that we are offering can have a significant impact on how well the sensors capture the desired image.”
Read more ...
October 25th, 2011
Adimec demonstrates advances in CoaXPress interface standard with 10 Gbps camera and other imaging innovations
Adimec (www.adimec.com), a world leader in application-specific, leading-edge industrial camera solutions, will demonstrate its first dual CoaXPress interface camera, running at 10 Gigabits per second, at the upcoming Vision 2011 event in Stuttgart, Germany 8-10 November. Shown with the Quartz Q-4A180/CXP area scan camera, this connectivity enhancement delivers the performance and cost benefits of the CoaXPress standard, and combines proven global shutter CMOS technology with the proprietary Adimec True Accurate Imaging® approach.
Read more ...
October 17th, 2011
How many cameras does a system need?
Multiple-camera vision systems can contain anywhere from three cameras for simple applications, such as pick-and-place component inspection, to as many as 20 cameras for applications that require complex algorithms for defect detection, such as wafer inspection and metrology. How many cameras and what mix of high-end and lower-end models you need depends on how you will use them, said Joost van Kuijk, VP of marketing and technology for Adimec.
Read more ...
September 7th, 2011
Adimec unveils new rugged COTS full HD cameras targeting demanding defense applications
Adimec (www.adimec.com), today unveiled its TMX6-DHD series of COTS cameras. The cameras, aimed at demanding airborne and land defense systems requirements will be introduced at the Defense and Security Equipment International (DSEi) event in London September 13 – 16, 2011.
Read more ...
August 2nd, 2011
Adimec enhances QUARTZ CMOS-based high-speed camera line with new 2-megapixel, 340 fps QUARTZ Q-2A340 model
Adimec today introduced the QUARTZ Q-2A340 area scan camera, extending its popular line of Quartz cameras based on high-performance CMOS sensors from CMOSIS. This camera combines proven global shutter CMOS technology with the proprietary Adimec True Accurate Imaging® approach that results in CCD-like image quality with unmatched speed.
Read more ...
July 21st, 2011
VISION 2011 to include focus on new interface standards for machine vision
The increasingly more efficient image sensors in digital cameras call for even faster data transmission methods. To date, Camera Link has been the ideal solution in many cases for high-speed applications. However, this no longer appears to be sufficient. New standardization attempts such as CoaXPress and Camera Link HS have been initiated. Version 2.0 of the GigE Vision Standard is due to be adopted in the third quarter of this year. Another interesting area for the machine vision industry is the extended USB 3.0 interface, which is currently making inroads into the consumer sector.
Read more ...
June 23rd, 2011
Vision Gets a Speed Boost
Machine vision sales continue to grow, with system builders and integrators reporting strong interest in vision solutions, according to the Automated Imaging Association. The organization's latest report recorded solid growth in all major machine vision supplier markets in 2010 (overall growth was 54%), with high hopes for 2011.
Read more ...
June 1st, 2011
Adimec introduces industry first dual CoaXPress camera New QUARTZ Q-4A180/CXP combines 4 MP imaging and 180 fps performance with benefits of CoaXPress interface
New QUARTZ Q-4A180/CXP combines 4 MP imaging and 180 fps performance with benefits of CoaXPress interface
Read more ...
May 30th, 2011
TV broadcasting in 3-D
The EUREKA TritonZ consortium of Belgian and Dutch companies explored technologies from the front to the end of the 3D TV broadcasting chain. The project partners developed technologies that make possible to capture live shows in 3D, although the broadcasting network isn't ready for that yet.
Read more ...
May 24th, 2011
Adimec introduces speed upgrade to Qs Series cameras to increase frame rates by 1.5x in Camera Link Base configurations
Qs-4A60 and Qs-2A120 deliver improved speeds without compromising image quality
Read more ...
May 10th, 2011
Adimec expands high-performance QUARTZ CMOSIS Camera Series with a Camera Link®-8 tap only version, the Q-4A150, to enhance cost/performance options for Camera Link-based systems
Adimec (www.adimec.com), a world leader in application-specific, leading-edge industrial camera solutions, today introduced the latest member of its CMOSIS based QUARTZ Series, the Q-4A150.
Read more ...
May 9th, 2011
Into Connect.
With the recent release of CoaXPress and the planned release of Camera Link HS later in the year, Greg Blackman explores in the April/May issue of Imaging and Machine Vision Europe how these two new standards will fit into the machine vision connectivity landscape
Read more ...
April 18th, 2011
Adimec Focuses on Defense Vision Applications at SPIE DSS 2011
Ruggedized, high resolution digital HD cameras
optimized for outdoor, military applications on display;
“See Through the Fog” demo showcases VEM video enhancement technology
Read more ...
April 5th, 2011
Adimec releases fastest Camera Link Base cameras with the new QUARTZ Qs series.
Qs-4A40 and a Qs-2A80 cameras deliver performance of up to 170 fps with
CCD-comparable quality through Adimec True Accurate Imaging® technology
Read more ...
April 4th, 2011
CoaXPress gains steam: See it in action at ISC West Las Vegas April 5- 8, 2011
ISC West Las Vegas April 5- 8, 2011
Read more ...
March 29th, 2011
Adimec touts image quality in CMOS cameras
Adimec touts image quality in CMOS cameras
Adimec also debuted what it calls the industry's first production-ready cameras using the new CoaXPress standard.
Read more ...
March 14th, 2011
Adimec first camera supplier to offer production-ready CoaXPress-certified products
Adimec first camera supplier to offer production-ready CoaXPress-certified products
Read more ...
March 7th, 2011
Adimec showcases camera innovations at North America’s largest automation exposition, Automate 2011
At the Automate 2011 in Chicago, Adimec showcases the OPAL series, the first area scan cameras with CoaXPress and the Q-4A180, running at 180 fps at 4 mpx.
Read more ...
March 1st, 2011
CMOS-BASED INTELLIGENT CAMERA FOR HIGH-END INSPECTION APPLICATIONS
Read more ...
February 23rd, 2011
Adimec offers enhanced Anti-Reflection Coating (ARC) options to improve quality and accuracy of imaging solutions
Read more ...
January 4th, 2011
CoaXPress Standard Gets Overwhelming Approval
The JIIA-hosted standard for flexible, high-speed imaging interface readies for product certification process, global launch expected in March 2011
Read more ...
December 1st, 2010
Adimec highlights camera innovations to Japanese market at ITE 2010
Read more ...
November 9th, 2010
Adimec adds near infrared (NIR) sensitivity to high performance QUARTZ series of cameras
QUARTZ Q-4A180 combines True Accurate Imaging™ technology with CMOS performance benefits for industry’s most advanced 4 megapixel, 180-fps camera
Read more ...
October 26th, 2010
Adimec showcases high-performance camera innovations at Vision 2010
CMOS-based QUARTZ series shows roadmap to next generation versions;
OPAL series demonstrates production ready CoaXPress implementation
Read more ...
October 8th, 2010
Adimec appoints Dr. Joost van Kuijk as VP Marketing and Technology to drive growth in high-end digital camera markets
Read more ...
July 26th, 2010
Update Adimec Website!
Read more ...
June 16th, 2010
Adimec launches Q-4A180
Read more ...
November 3rd, 2009
CoaXPress wins Vision Award 2009
Read more ...
June 9th, 2009
CoaXPress beyond Camera Link
Read more ...
February 3rd, 2009
Adimec Launches Global website in Chinese
Read more ...
December 18th, 2008
Adimec first organization in the Netherlands receiving the recently released issue of ISO 9001:2008 certificate.
Read more ...
October 8th, 2008
Adimec Introduces the 2 MP OPAL/ONYX Cameras
Read more ...
July 3rd, 2008
Kodak CCD sensors on shuttle
Read more ...
June 10th, 2008
IMVE Interview with Just Smit
Read more ...
February 21st, 2008
Adimec Introduces 1 Megapixel GigE Camera
Read more ...
February 21st, 2008
New PEARL & RUBY cameras for medical imaging
Read more ...
February 1st, 2008
Andries Hofman appointed new CEO of Adimec
Read more ...
November 21st, 2007
Introduction OPAL-1000
Read more ...
September 11th, 2007
Space Shuttle relies on Adimec’s cameras for critical inspection
Read more ...
May 10th, 2007
Niederländischer kamerahersteller hat grosse Ziele- die Potentiale der IBV will man nutzen (German)
Read more ...
January 17th, 2007
NASA Shuttle launches with Adimec's cameras onboard, again
Read more ...
August 1st, 2006
'NASA Shuttle captures images using Adimec HDTV cameras'
Read more ...
July 27th, 2006
Space Shuttle's vision-guided robot arm captures tile images'
Read more ...
July 25th, 2006
NASA Shuttle captures images using Adimec cameras
Read more ...
July 24th, 2006
Camera Company Aims High - NASA Shuttle captures images using Adimec HDTV cameras
Read more ...
June 29th, 2006
Adimec’s 4-Megapixel Camera for Fast Machine Vision
Read more ...
June 7th, 2006
Adimec Group will open a Business Office in Singapore on 1 April 2006
Read more ...
January 20th, 2006
Rugged Cameras for High Performance in Harsh Environments
Read more ...
