EINDHOVEN, The Netherlands, March 12, 2019 — Adimec (www.adimec.com), a world leader in application-specific, leading-edge industrial camera solutions, will present several premier machine vision cameras at Vision China, part of Laser World of Photonics China Shanghai 2019 , March 20th through March 22nd, 2019. Adimec will launch the 65 megapixel Sapphire S-65A35 as well the DIAMOND D-12A09. Other cameras that will be demonstrated include the high-speed QUARTZ Q-12A180, and Adimec’s NORITE Experience Package, using the NORITE N-5A100 for those looking for the next generation of multi-camera display inspection solutions.
The SAPPHIRE S-65A35 renders phenomenal performance in a rectangular 9344×7000-pixel resolution running over 35 fps. The camera has a low read noise, with a good thermal design for passive cooling, and high dynamic range of 66dB, using Gpixel GMAX3265 global shutter sensor technology with a pixel size of 3.2 microns. These resolution and performance parameters make this camera an exceptional next step in tools used in, for example semiconductors and display inspection and metrology.
The DIAMOND D-12A09 GigE Vision camera delivers 4096×3008-pixel resolution at 9 fps with 3.45-micron square pixels. Adimec’s DIAMOND 12-megapixel camera features optimized solution for applications like display or wafer inspection, requiring a high dynamic range and an excellent performance in measurements in dark. Special features in the camera enable Mura dark and Mura bright inspection without mechanical adaptation.
The QUARTZ Q-12A180/CXP camera brings 4096×3072 top quality pixels to the image for real time metrology tasks with a reliable high speed CoaXPress data interface. The camera delivers 12 megapixel clear raw images at every frame rate up to 187 fps, greatly enhancing system performance and efficiency. Unique is the multiple uniformity, sequential functionality, ideally for measurement tools using multiple wavelengths and / or lighting set-ups.
NORITE N-5A100 cameras are for developers of multi-camera systems, such as side-view cameras for 3D metrology. The 5 megapixel single CXP N-5A100 is a a less cumbersome system through its simplicity while increasing throughput. Multi-camera systems using N-5A100 cameras eliminate the cabling and synchronization constraints with Camera Link- and USB 3.0 vision-based systems.
The Norite N-5A100 camera is a 5-megapixel camera at 105 full fps with CMOS global shutter technology in a 1” optical format. The Norite optimizes the ON Semiconductor Python5k global shutter image sensor in the compact form factor of 29x29x45 mm.
The SAPPHIRE S-50A30/CXP uses the AMS CMOSIS 50000 CMOS global shutter for 50 megapixels (7920 x 6004) at 30 full-frames per second. This CMOS camera offers high resolution, high frame speeds and outstanding image quality to measure even smaller defects with the increased accuracy and speed required by in-line optical metrology systems.
Be sure to find Adimec on the exhibition floor at Booth #5506 to see these cameras in action and discuss your imaging system requirements.
About Adimec
Adimec specializes in the development and manufacturing of high-performance cameras that meet the application-specific requirements of key market segments, including machine vision, healthcare, and global security. Founded in 1992, the company partners with major OEMs around the world to facilitate the creation of industry-leading cameras. Its products meet a wide range of performance, size, cost, interface and application requirements and its Adimec True Accurate Imaging® technology provides new levels of precision and accuracy to vision systems. Adimec has offices around the world focused on creating customer value and satisfaction through local, personalized support. For more information, go to www.adimec.com. For more information on imaging and vision topics, check our blog.
Contact Information
Adimec Advanced Image Systems b.v.
the Netherlands
Tel: +31-40-2353900
Adimec Trading Co., Ltd
Shanghai, China
Tel: +86 2162661692
Press Contact: E. Nugteren (enugteren@adimec.com)