Beginning in April 2015 (with expected completion in 2018), Adimec has participated as a key partner in the CISTERN project for advancing CMOS image sensor technology. We are now sharing our first results including a low light CMOS cameras for security applications.
The Association of the United States Army (AUSA) is a private, non-profit, professional educational organization dedicated to maintaining a strong national security with a special emphasis on land power and the United States Army. Held every October, the AUSA Annual Meeting is the largest land power exposition and professional development forum in North America. This…
Over 60 imaging and machine vision professionals from 36 leading machine vision companies worldwide met under the support of the global Machine Vision associations AIA, EMVA, JIIA, VDMA and CMVU (jointly referred to as G3) in the middle of October in Chicago for this years fall International Vision Standards Meeting (IVSM). The meeting was hosted…
At the International Technical Exhibition (ITE) in Yokohama, Japan from the 2nd to the 4th of December, we will demonstrate additions to our latest CMOS-based camera series including the new Adimec SAPPHIRE S-25A70, the fastest 25 Megapixel camera running up to 73 fps over CoaXPress.
Adimec receives multiple design-in from medical and machine vision customers for future inspection systems
This article appeared in Control Engineering: http://www.controleng.com/single-article/supporting-machine-vision-for-success/22feb0fd36da6be456386d1e22fbb888.html
We have talked a lot about improvements in CMOS image sensors in low light imaging capabilities which are particularly helpful in outdoor applications such as long-range observation, surveillance, and global security. The image sensor parameters relevant to low light are QE (Quantum efficiency), read noise, dark current, uniformity, and MTF (in NIR).
And another year is coming to a close. There have been a lot of exciting changes in CMOS image sensors and cameras this year. We have been sharing lots of updates, images, and data. Here are some of the most popular posts:
With interface standards, the supported connectors are included. It might seem that this would not be complex and the possibilities would be limited. But if it not controlled there can easily be over 100 different types of connectors making designing, purchasing, and upgrading confusing and risky.
With the increased adoption of CoaXPress by inspection and metrology system designers, there are many new CoaXPress cables, frame grabbers, and cameras coming to the market. To make sure that all of the components work seamlessly together, there is a detailed procedure outlined by JIIA for official certification. This involves thorough testing for compliance to…
English
日本語
简体中文