{"id":1723,"date":"2017-10-13T22:44:20","date_gmt":"2017-10-13T20:44:20","guid":{"rendered":"https:\/\/www.adimec.com\/adimec-demonstrates-the-fastest-25-megapixel-vita-25k-camera-at-ite-2015\/"},"modified":"2018-07-27T16:00:15","modified_gmt":"2018-07-27T14:00:15","slug":"adimec-demonstrates-the-fastest-25-megapixel-vita-25k-camera-at-ite-2015","status":"publish","type":"post","link":"https:\/\/www.adimec.com\/ja\/adimec-demonstrates-the-fastest-25-megapixel-vita-25k-camera-at-ite-2015\/","title":{"rendered":"Adimec demonstrates the fastest 25 Megapixel Vita 25k camera at ITE 2015"},"content":{"rendered":"
At the International Technical Exhibition<\/a> (ITE) in Yokohama, Japan from the 2nd <\/sup>to the 4th<\/sup> of December, we will demonstrate additions to our latest CMOS-based camera series including the new Adimec SAPPHIRE S-25A70<\/a>, the fastest 25 Megapixel camera running up to 73 fps over CoaXPress<\/a>.<\/p>\n <\/p>\n The S-25A70<\/a> has been designed into several instruments and is now commercially available to allow metrology equipment manufacturers to take the next required performance leap in accuracy and throughput.<\/p>\n The S-25A70\/CXP camera offers:<\/p>\n Adimec will also the Q-12A180 and the Q-2A750 prototype. The Q-12A180\/CXP<\/a> is the first CoaXPress 1.1 camera available and utilizes the CMOSIS CMV12000 global shutter image sensor. This camera outputs 12 Megapixel images at 187 fps. CoaXPress CXP-6 Quad (4 x CXP-6) offers a peak transfer rate of 2 Gigapixels\/s with data transmission between the camera and frame grabber at up to 25 Gbits\/s (4 x 6.25 Gbits\/s). The maximum of 9W of power to the camera is also enabled over the one CoaXPress interface cable. This is all with a cable length of up to 68 meters. The QUARTZ<\/a> Q-2A750\/CXP is a new 2 Megapixel camera operating at up to 720 fps over CoaXPress.<\/p>\n Adimec\u2019s CMOS cameras offer the highest speed, high resolution with reliable and highest image quality to measure ever smaller critical structures or defects with the increased accuracy and throughput required by in-line optical metrology systems.<\/p>\n Adimec will be in Booth 114<\/strong> on the exhibition floor with demonstrations of these innovations and more. <\/p>\n\n