There are always small changes (at no additional product cost) that can be made to increase the performance of your machine vision camera and thus to your overall inspection or metrology system. Perhaps there are low light levels in the system and you need to improve image quality. Binning which is adding the charge of…
The CAReIOCA project was recently completed and the final newsletter was released last week. Several new products result from the cooperation between Adimec and partners:
This story appeared on phys.org (http://phys.org/news/2015-10-internal-fingerprint-sensor-peers-fingertips.html) about a new internal fingerprint sensor that peers inside fingertips for more accurate identification. The sensor (camera) utilized is the high full well (2000 kel), high speed camera developed by Adimec.
The latest ultra resolution industrial image sensors offer impressive pixel throughput, such as 25 Megapixels at 72 frames per second. These pixel rates can no longer be transferred to the PC via Camera Link but can via interfaces such as CoaXPress (CXP). The resulting cameras can offer faster frame rates at lower resolutions through the…
Technology advances and innovative ideas come from open discussions and exchanges of ideas. We try to make our blog (https://www.adimec.com/blogs/) a place where we can do this. Check out this video for more information on our blog: Other great blogs that are helpful resources on machine vision and industrial camera/image sensor topics you may…
Flat-Field Correction (FFC) can be done with both CCD and CMOS-based cameras to correct for sensor artifacts, lens artifacts, and illumination artifacts (shading). The purpose of flat field correction is to ensure image uniformity regardless of exposure. With CMOS sensor-based cameras, FFC is especially important to minimize or even remove sensor artifacts and improve…
How electro-optical sensor modules with full HD resolution or higher, enhance the detection, recognition, and identification capabilities of situational awareness, long- range observation and designator systems. To improve the information gathered from situational awareness, long-range observation and designator systems, the big trend is to gather full motion video 24/7 with the addition of more daylight…
For details on measuring the Photon Transfer Curve, Hyperspectral Imaging, Machine Vision Camera Evaluation and Selection or 3-D Underwater Imaging, check out some of our most popular posts: Measuring the Photon Transfer Curve How to Measure the Photon Transfer Curve for CCD or CMOS Cameras How to Measure the Photon Transfer Curve for CCD or…
When there are pixels on the image sensor whose response is an extreme outlier, these defect pixels can be corrected to ensure that they do not affect the precision or accuracy of the system. With the introduction of large CMOS image sensors and cameras on the market the topic of defect pixel correction is becoming…
Choosing the correct industrial camera for your new and innovative system from the beginning can eliminate costly redesigns or upgrades in the future. The question is, how do you determine the best camera without being able to test it in the final design? Best is always subject to your needs but what are the exact…
Scripts are blocked, when filling in personal data our privacy policy applies Read more
English
日本語
简体中文