A collection of our blogs about cameras and related topics for the Healthcare market.
While there are many viable alternatives to Image Intensifier CCD RIUs (II-CCD RIUs), Indium Gallium Zinc Oxide (IGZO) flat panel detectors offer an interesting and promising option as a replacement. These panels could offer an ideal mix of performance versus cost, especially in larger panel options. With existing factories switching to IGZO panel production,…
As discussed in the first blog in this three-part series, key factory shutdowns and general shifts in the X-Ray imaging market have lead to Image Intensifier (II)-CCD RIUs going obsolete. As CCD obsolescence becomes more prevalent in Healthcare and the dynamic imaging X-Ray market, the need to find alternatives is imminent. There are three flat…
With major producers of CCD’s shutting down manufacturing factories, the gradual shift away from CCD Radiology Imaging Units (RIU’s) has been rapidly sped up and obsolescence of these units is imminent. CCD image sensors are a key component of camera lens assemblies that, together with an image intensifier, forms an RIU used for x-ray…
The main problem with the modern microscopy in pathology is that it requires expertise in staining to see the structures and composition of the tissue. While there is a solution in using Mid-infrared imaging to create virtual tissue staining, many optical imaging components absorb infrared light which makes this type of imaging incompatible with modern…
You might have already noticed that we have a new website. With the release of the new website we also made it easier to contact Adimec support. Read the 3 ways to contact Adimec Support below. If you want to have local support, you can contact the appropriate e-mail address below. For the USA: SupportUS@adimec.us…
Next generation camera lens assemblies with CMOS image sensors for C-arm X-ray systems can improve image quality and reduce patient dose while also simplifying installation and service. RUBY delivers full digital real-time 1k2 30fps imaging for Image Intensifier based medical X-Ray imaging systems to increase performance and reduce costs. This is the third of a…
Next generation camera lens assemblies with CMOS image sensors for C-arm X-ray systems can improve image quality and reduce patient does. Adimec’s RUBY delivers full digital real-time 1k2 30fps imaging for Image Intensifier based medical X-Ray imaging systems. This is the second of a three-part series on Adimec’s new Ruby camera lens assembly (CLA) for…
Adimec’s new Ruby camera lens assembly (CLA) for X-Ray imaging. RUBY delivers full digital real-time 1k2 30fps imaging for Image Intensifier based medical X-Ray imaging systems. This is the first of a 3 part series. RUBY is specifically designed to reduce costs in fluoroscopy C-arm systems compared to existing CCD based solutions (Part 1), while…
It is important to manufacture cameras in a conditioned environment. If there is too much dust, the camera could get contaminated. If the humidity is too low, image sensors could get damaged due to electrostatic discharge (ESD). Nowadays the room conditions in the factory are mostly electronically measured however in the past analog devices where…
This weekend 1st of July Adimec reached the age of 25 years! To celebrate this all employees where welcomed on Monday morning by a “party committee” to show appreciation for the work they did to make Adimec reach the age of 25 years and to motivate them for the years to come.