November 19th, 2015

Adimec demonstrates the fastest 25 Megapixel Vita 25k camera and other imaging innovations at ITE 2015

25 Megapixels at 73 fps with the Quad CoaXPress interface in a low power, compact design 

 

EINDHOVEN, The Netherlands, November 19, 2015 --  Adimec (www.adimec.com), a world leader in application-specific, leading-edge industrial camera solutions, will showcase its portfolio of machine vision products and technology at the International Technical Exhibition (ITE) in Yokohama, Japan from the 2nd to the 4th of December.  The company will demonstrate additions to its latest CMOS-based camera series including the new Adimec SAPPHIRE S-25A70, the fastest 25 Megapixel camera running up to 73 fps over CoaXPress.

 

The S-25A70 has been designed into several instruments and is now commercially available to allow metrology equipment manufacturers to take the next required performance leap in accuracy and throughput.

The S-25A70/CXP camera offers:

  • Optimization of the ON Semiconductor Vita25k global shutter image sensor
  • 25 Megapixel CMOS global shutter camera
  • Images of 5120 x 5120 pixels at a maximum 73 full frames per second (fps).
  • Equipped with the CoaXPress V1.1 Quad interface (4 x CXP-6) utilizing Adimec’s new 2 Gigapixels/s camera platform.
  • Lowest power, fan-less Quad CoaXPress implementation in a compact form factor. 
  • Easy to integrate without unwanted noise caused by heat
  • Excellent price/performance ratio

 

Adimec will also demonstrate the Q-12A180 and the Q-2A750 prototypes. 
The Q-12A180/CXP is the first CoaXPress 1.1 camera available and utilizes the CMOSIS CMV12000 global shutter image sensor.  This camera outputs 12 Megapixel images at 187 fps. CoaXPress CXP-6 Quad (4 x CXP-6) offers a peak transfer rate of 2 Gigapixels/s with data transmission between the camera and frame grabber at up to 25 Gbits/s (4 x 6.25 Gbits/s). The maximum of 9W of power to the camera is also enabled over the one CoaXPress interface cable. This is all with a cable length of up to 68 meters.
The QUARTZ Q-2A750/CXP is a new 2 Megapixel camera operating at up to 720 fps over CoaXPress.

 

Adimec’s CMOS cameras offer the highest speed, high resolution with reliable and highest image quality to measure ever smaller critical structures or defects with the increased accuracy and throughput required by in-line optical metrology systems.

 

Adimec will be in Booth 114 on the exhibition floor with demonstrations of these innovations and more.  

 

About Adimec

Adimec specializes in the development and manufacturing of high-performance cameras that meet the application-specific requirements of key market segments, including machine vision, healthcare, and global security.  Founded in 1992, the company partners with major OEMs around the world to facilitate the creation of industry-leading cameras.  Its products meet a wide range of performance, size, cost, interface and application requirements and its Adimec True Accurate Imaging® technology provides new levels of precision and accuracy to vision systems.  Adimec has offices around the world focused on creating customer value and satisfaction through local, personalized support. For more information, go to www.adimec.com. For more information on imaging and vision topics, check our blog.

 

Contact Information

Adimec Advanced Image Systems bv

Tel: +31-40-2353900

Fax: +31-40-2353905

www.adimec.com

Press Contact: E. Nugteren ()

 

***

 

back to overview

 

How-to-compare-cameras